Research on Biomedical Engineering
http://www.rbejournal.periodikos.com.br/article/doi/10.1590/2446-4740.04217
Research on Biomedical Engineering
Technical Communication

An automatic gain control circuit to improve ECG acquisition

Marco Rovetta; João Fernando Refosco Baggio; Raimes Moraes

Downloads: 0
Views: 780

Abstract

Abstract: Introduction: Long-term electrocardiogram (ECG) recordings are widely employed to assist the diagnosis of cardiac and sleep disorders. However, variability of ECG amplitude during the recordings hampers the detection of QRS complexes by algorithms. This work presents a simple electronic circuit to automatically normalize the ECG amplitude, improving its sampling by analog to digital converters (ADCs).

Methods: The proposed circuit consists of an analog divider that normalizes the ECG amplitude using its absolute peak value as reference. The reference value is obtained by means of a full-wave rectifier and a peak voltage detector. The circuit and tasks of its different stages are described.

Results: Example of the circuit performance for a bradycardia ECG signal (40bpm) is presented; the signal has its amplitude suddenly halved, and later, restored. The signal is automatically normalized after 5 heart beats for the amplitude drop. For the amplitude increase, the signal is promptly normalized.

Conclusion: The proposed circuit adjusts the ECG amplitude to the input voltage range of ADC, avoiding signal to noise ratio degradation of the sampled waveform in order to allow a better performance of processing algorithms.

Introduction: Long-term electrocardiogram (ECG) recordings are widely employed to assist the diagnosis of cardiac and sleep disorders. However, variability of ECG amplitude during the recordings hampers the detection of QRS complexes by algorithms. This work presents a simple electronic circuit to automatically normalize the ECG amplitude, improving its sampling by analog to digital converters (ADCs). Methods: The proposed circuit consists of an analog divider that normalizes the ECG amplitude using its absolute peak value as reference. The reference value is obtained by means of a full-wave rectifier and a peak voltage detector. The circuit and tasks of its different stages are described. Results: Example of the circuit performance for a bradycardia ECG signal (40bpm) is presented; the signal has its amplitude suddenly halved, and later, restored. The signal is automatically normalized after 5 heart beats for the amplitude drop. For the amplitude increase, the signal is promptly normalized. Conclusion: The proposed circuit adjusts the ECG amplitude to the input voltage range of ADC, avoiding signal to noise ratio degradation of the sampled waveform in order to allow a better performance of processing algorithms.

Keywords

Biopotential amplifier, QRS detection, Amplitude normalization, AGC, SNR

References

Elgendi M, Eskofier B, Dokos S, Abbott D. Revisiting QRS detection methodologies for portable, wearable, battery-operated, and wireless ECG systems. PLoS One. 2014; 9(1):e84018. PMid:24409290. http://dx.doi.org/10.1371/journal.pone.0084018.

Jha P, Patra P, Naik J, Dutta A, Acharya A, Rajalakshmi P, Singh SGA. 2μW biomedical frontend with ΣΔ ADC for self-powered U-healthcare devices in 0.18 μm CMOS technology. In: Proceedings of the IEEE 13th New Circuits and Systems Conference; 2015 Jun 7-10; Grenoble, France. United States: IEEE; 2015. p. 1-4. http://dx.doi.org/10.1109/NEWCAS.2015.7182054.

Komorowski D, Andrzej M, Stanislaw P. Hybrid system of ECG signal acquisition and QRS complexes detection for special medical devices synchronization. JMIT. 2013; 22:227-34.

Lobodzinski SS, Laks MM. New devices for very long-term ECG monitoring. Cardiol J. 2012; 19(2):210-4. PMid:22461060. http://dx.doi.org/10.5603/CJ.2012.0039.

Oppenheim AV, Schafer RW. Discrete-time signal processing. 3rd ed. Upper Saddle River: Prentice-Hall; 2010.

Romero RA, Silva GM, Sousa FR. A duty-cycle controlled variable-gain instrumentation amplifier applied for two-electrode ECG measurement. In: Proceedings of the IEEE Instrumentation and Measurement Technology Conference; 2012 May 13-16; Graz, Austria. United States: IEEE; 2012. p. 1270-74.

Webster JG, editor. Medical instrumentation: application and design. 4th ed. Hoboken: John Wiley and Sons; 2010.

Yamakawa T, Matsumoto G, Aoki T. A low-cost long-life R-R interval telemeter with automatic gain control for various ECG amplitudes. Journal of Advanced Research in Physics [internet]. 2012 [cited 2017 Jul 24]; 3(1):011205. Available from: http://stoner.phys.uaic.ro/jarp/index.php?journal=jarp&page=article&op=view&path%5B%5D=54
 

5a2fffcb0e8825e325672081 rbejournal Articles
Links & Downloads

Res. Biomed. Eng.

Share this page
Page Sections